Tools

Universal Cable Stripping Tool with Cable Stop for RG59 and RG6 COAX cables, Network, and Telephone Cables

Miller® CFS-3 Fiber Optic Stripper for stripping 250 micron coating, 600-900µm buffer coating and 1.6-3mm fiber jackets

Fiber Optic Polishing puck for SMA connectors

MDC-14 - Micro Duct Tube Cutter up to 14mm diameter, cuts micro ducts and other types of  tubing made from PVC, Nylon, Polyethylene and other materials

FO103-S-300 Miller Stripper for stripping 900 micron to 300 micron

speed pipe® cutter for burr-free cutting of speedpipe under 90° to the tube axis, for speed pipes up to 20mm diameter

Designed to open fiber jackets and loose buffer tubes to provide easy fiber access, for cables from 2.9mm to 6.8mm in diameter

Set in plastic case includes RAUCUT I tool, spatula, allan key, spare blades, cable guides 1.8 / 2.0 / 2.4 / 2.8 / 3.0 / 3.5 / 4.2mm

Fiber Optic Scorer for easily scoring buffer tube sizes from 1.6 mm to 6.0 mm with hardened carbon steel blade

Tweezers, length 130mm, stainless steel

JONARD TOOLS® Rugged 21 Pocket Tool Case H-90 with a removable top, dimensions 255 mm x 280 mm x 205 mm (HxWxD)

Replacement blade for speed pipe® cutter GA-PIPECUT

 “Tri-Hole” Fiber  Optic Stripper for removal of 2-3mm jacket, 900 micron tight buffer and 250 micron coating

COAX Stripping Tool with Twin RG59 and RG6 Blade, to strip RG59, RG6, N48, RG6 Tri & Quad Shield coaxial cables 

This is a Triple Action Tool, cutting longitudinally for end stripping, spiral for end stripping and mid-span cuts, and circular for jacket removal

Set in plastic case includes: RAUCUT II tool, 6 guide rollers dia. 5 mm – 10 mm

Fiber Optic Scorer for easily scoring buffer tube sizes from 1.6 mm to 6.0 mm with hardened carbon steel blade, cutting depth 0,89mm

C.K SensoPlus ESD Bent Snipe Nose Plier 150 mm, special alloy steel, ESD compliant for safe use

Tube cutter for stainless steel tubes with an outer diameter of 1mm – 6mm, Burr free cut

professional tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter

Fiber Prep Kit with Small & Large Mid Span Slitters provides an array of tools needed to access and prepare a fiber optic cable for termination

MDC-64 - Large Fiber Duct Cutter up to 64mm, cuts PVC, CPVC, PE, HDPE, PEX and other nonmetallic tubing

Jonard Tools Adjustable Wire Stripper, 26-36 AWG, perfect tool for stripping wires quickly and easily

Premise Toner Drop Cable Continuity Tester to check the circuit integrity in new or installed cable up to 5,000 feet (1,500 meters) length

Fiber Optic Jacket Slitting Tool 2mm / 2.5mm / 3mm - Provides two jacket slits 180 degrees apart with nick free jacket slitting

C.K Heavy Duty Cable Shears for large diameter copper and aluminium cables up to 27mm diameter

ACS+ Armored Cable Slitter for cable from 4mm to 28.6mm, longitudinal, circumferential (ring) & spiral cuts, adjustable blade depth

MDC-28 Micro Duct Cutter for fiber ducts up to 28mm, perfect for cutting PVC, CPVC, HDPE, and other plastic tubing

C.K Heavy Duty Ratchet Cable Cutter, heavy duty ratchet for the cutting of large diameter cable up to 52mm Ø (Al & CU), or 36mm Ø (SWA)

perfect tool for inserting and extracting fiber connectors in high density patch panels, work with LC, SC-Simplex, SC-Duplex, MU, MT-RJ

Advanced Precision Diagonal Cutters, ideal for the preparation of eLANtix module assembly

C.K Xonic ESD Screwdriver Slotted/PH Set Of 7, premium quality alloy steel blade, fully ESD compliant for safe use

Professional-grade ratcheting slitter designed for both longitudinal, circumferential (ringing) cuts for either mid-span or end cable preparation.

Tapered nose diagonal cutting pliers with standard bevel knives with one .045" skinning hole, crusher used for multipurpose wire work, and two V shaped stripping notches. 

• Wire range 0.75-6mm²
• Form-ground, hardened, knife-type blades for accurate stripping
• Tough steel construction
• Built-in wire cutter and wire looping holes
• Plier nose for extra gripping strength
• Laser-etched wire gauge markings
• Spring-loaded automatic opening
• Corrosion-resistant, black oxide finish

Kevlar® Shears, ideal for cutting Kevlar® strength members found in fiber optic cable construction

Jonard Tools® Multi Wire Stripper 0.6 / 0.8 / 1.0 / 1.3 / 1.6 / 2.0 / 2.6 mm (AWG 22-10)

Fiber Scribe Carbide with 6mm wide blade - ideal for scratch and pull scribing of fiber optic cables

Plain Diagonal Pliers for general use including soft copper conductors, red handle, lenght about 13cm

tool for inserting and extracting fiber connectors in high density patch panels, works with LC connectors in tightly packed bulkheads

• Strips and cuts insulated wire sizes from #22 AWG (0.65 mm) to #10 AWG (2.6mm)
• Effective for stripping fiber optic buffer jackets and tubing
• Stop screw adjusts easily to fit wire size
• All cutting surfaces are precision formed, hardened, tempered and ground assuring clean, smooth strips
• Soft plastic coated handles
• Also available with opening spring and closing lock feature (Model #101-S)
• Length: 5.07 in (130.00 mm)
• Weight: 2.49 ounces (71.0g)

Jonard Universal Compression Tool for use on F connectors, BNC connectors and RCA connectors, dual-head and adjustment dial to accommodate various connectors

Jonard Tools® Multi Wire Stripper 0.4 / 0.5 / 0.65 / 0.8 / 1.0 / 1.3 mm (AWG 26-16)

professional grade tool, ideal for slitting the corrugated copper, steel or aluminum armor layer and other armored cables 4-10mm

FTS-005 Fiber tube scorer up to 2 mm, can score tubes with walls from 0,13 to 0,25mm, color: red

• Wire range 0.75-6mm²
• Form-ground, hardened, knife-type blades for accurate stripping
• Tough steel construction
• Built-in wire cutter and wire looping holes
• Plier nose for extra gripping strength
• Laser-etched wire gauge markings
• Spring-loaded automatic opening
• Corrosion-resistant, black oxide finish

Jonard Tools® JIC-2030 Multi Wire Stripper 0.25 / 0.32 / 0.40 / 0.50 / 0.65 / 0.8 mm (AWG 30-20)

• Wire range #8 to #16 AWG stranded
• Form-ground, hardened, knife-type blades for accurate stripping
• Tough steel construction
• Built-in wire cutter and wire looping holes
• Plier nose for extra gripping strength
• Laser-etched wire gauge markings
• Spring-loaded automatic opening
• Corrosion-resistant, black oxide finish

precise Mid-Span Access Tool to optical fibers in loose buffer tubes for tube sizes from 1.9mm to 3.0mm (MSAT5)

Fiber Optic Polishing puck (metal) for 2.5 mm ferrule connectors including ST, SC and FC Connectors

Miller® Replacement blade for W-ACS

Cable Tie Gun for cable ties from 2,4 - 4,8 mm, light & strong, tensioning & trimming, with tension adjuster

Adjustable Wire Stripper & Cutter for 10-30 AWG solid and stranded wire, precision-ground “V” notch blade for superior stripping results

Size: 140x140mm