FTTx Solutions

Fiber optic wall outlet with 9 diffenent adaptor plates for different adaptors, similar RAL9010, unloaded

PoP Optical Distribution frame without doors and walls, rack dimensions 2200 x 900 × 300 mm, Capacity of 72 modules (864 fibres)

Price on request!

Divisible miniduct seal 10mm/2,5mm, Gas- and water tight up to 0,5 bar

Patchcord Quikpush® SC/APC 8° - SC/APC 8° FTTH Miniflex® 1E9/125 G657A1, Fiber 250µm, white, Cca, diameter: 3,0mm

for 4x SC simplex or LC duplex adaptors (without flange), integrated swiveling splice tray for up to 4 splices (heatshrink)

Dropcable FTTH I-V(ZN)H 4E9/125µm G.657.A2, 900µm Buffer, white, cable outer diameter about 4mm

frame for faceplate 80 x 80mm, colour RAL9010 (white), Setec

Microcable A-DQ(ZN)2Y 1x4 E9/125µm G657A1, outer jacket: MDPE black, cable outer diameter about 2.5mm

Module for PoP Optical Distribution Frame, equipped with 12x SC/APC simplex adaptor green, SC/APC 8°-Pigtail 9/125µm G657A1, 2m, splice tray

Price on request!

Miniflex® Indoor cable 1E9/125 G657A2, 250µm fibres, CPR class Eca, cable outer diameter about 3,0mm

Prelube 2000™ Cable Blowing Lubricant for Blowing Conventional Fiber Optic Cable, 0,95 Liter

Divisible miniduct seal 7mm/2,5mm, Gas- and water tight up to 0,5 bar

Drop Cable FTTH 4E9/125µm G.657.A2, 900μm Buffer, white,
inner end terminated with 4x LC/APC,
Length = 15m

Polywater® FST™ Foam Duct Sealant Kit - a Foam Duct Sealing System for 2-inch/50-mm or Larger Conduits

Polywater® FST™ Mini Foam Duct Sealant (Single Kit) - a Foam Duct Sealing System for conduit sizes 3/4'' up to 1.5''

Reducer Microduct connector 10/8 to 7/5.5mm, with locking clips

Patchcord Quikpush® SC/APC 8° - LC/APC 8° FTTH Miniflex® 1E9/125 G657A1, Fiber 250µm, white, Cca, diameter: 3,0m

Blanking plugs (white) for unused ports on FTTH wall outlet DLWL-F4-0 (pack of 20 pcs.)

Prelube 5000™ Microcable Blowing Lubricant for Blowing Fiber Optic Microcables

Miniflex® Indoor cable 4E9/125 G657A2, 250µm fibres, CPR class Eca, cable outer diameter about 3,0mm

back box 80 x 80 x 40mm, similar RAL9010, Setec

Microcable A-DQ(ZN)2Y 1x6 E9/125µm G657A1, outer jacket: MDPE black, cable outer diameter about 2.5mm

Holder of thick-walled microducts for max. 9 microducts/cables for PoP

Price on request!

Prelube 2000™ Cable Blowing Lubricant for Blowing Conventional Fiber Optic Cable, 3,8 Liter

for 4x SC simplex or LC duplex adaptors (without flange), integrated swiveling splice tray for up to 8 splices (crimp)

Polywater® Applicator Gun for FST, UPR & SDP Sealants, e.g. X-PW-FST-250KI1

Polywater® Applicator Tool  for BT, EPCT & SDP Sealants

Reducer Microduct connector 12/10 to 10/8mm, with locking clips

Drop Cable FTTH 4E9/125µm G.657.A2, 900μm Buffer, white,
inner end terminated with 4x LC/APC,
Length = 25m

Divisible duct seals 10mm / 2,5-1,5mm, Gas and Watertight up to 0,5 bar, Easy installation, slim design

Prelube 5000™ Microcable Blowing Lubricant for Blowing Fiber Optic Microcables, content: 16-fl oz (480ml)

Microcable A-DQ(ZN)2Y 1x12E9/125µm G657A1, outer jacket: MDPE black, cable outer diameter about 2.5mm

Protective duct, diameter 4mm, length 50m

Price on request!

Prelube 2000™ Cable Blowing Lubricant for Blowing Conventional Fiber Optic Cable, 18,9 Liter

Coil in pull-out box with:
Drop Cable FTTH 4E9/125µm G.657.A2, 900μm Buffer, white,
inner end terminated with 4x LC/APC,
Length = 20m

Fiber optic Interconnection Box FTTH wall outlet incl. 1x LC/APC duplex adaptor with external shutter, dimensions 100x80x30mm

Reducer Microduct connector 12/10 to 7/5.5mm, with locking clips

Divisible duct seals 10mm / 3,5-2,5mm, Gas and Watertight up to 0,5 bar, Easy installation, slim design

The Fiber Optic Box is designed for distribution of micro cable or outdoor cable to fiber optic drop cable, capacity up to 24 splices.

The Fiber Optic Box is designed for terminating micro cable to 12x SC duplex oder 12x LC quad adaptors, capacity up to 48 splices.

Microcable A-DQ(ZN)2Y 1x24E9/125µm G657A1, outer jacket: MDPE black, cable outer diameter about 3.5mm

Cable splitter 8x 4mm, from cable 96F on 8x12F into 4mm duct

Price on request!

frame for faceplate 80 x 80mm, colour RAL1013, Setec

Coil in pull-out box with:
Drop Cable FTTH 4E9/125µm G.657.A2, 900μm Buffer, white,
inner end terminated with 4x LC/APC,
Length = 30m

Fiber optic Interconnection Box FTTH wall outlet incl. 2x LC/APC duplex adaptor with external shutter, dimensions 100x80x30mm

Endstop for 7mm micro tubes with locking clip

Reducer Microduct connector 14/12 to 10/8mm, with locking clips

Divisible duct seals 10mm / 5,0-3,5mm, Gas and Watertight up to 0,5 bar, Easy installation, slim design

back box 80 x 80 x 40mm, similar RAL1013, Setec

Coil in pull-out box with:
Drop Cable FTTH 4E9/125µm G.657.A2, 900μm Buffer, white,
inner end terminated with 4x LC/APC,
Length = 40m

Fiber optic Interconnection Box FTTH wall outlet incl. 4x LC/APC duplex adaptor with external shutter, dimensions 100x80x30mm

Endstop for 10mm micro tubes with locking clip

Reducer Microduct connector 14/12 to 12/10mm, with locking clips

Endcap for 7mm micro tubes (packaging unit = 100 pcs.)

Divisible duct seals 10mm / 6.5-5.0mm, Gas and Watertight up to 0,5 bar, Easy installation, slim design

The Fiber Optic Box is designed for terminating micro cable to 48x SC simplex oder 48x LC duplex adaptors, capacity up to 96 splices.

Microcable A-DQ2Y 4x12 E9/125µm G.652.D, outer jacket MDPE black, cable outer diameter about 5.2mm

Divisible duct seals 12mm / 2,5-1,5mm, Gas and Watertight up to 0,5 bar, Easy installation, slim design