Accessories

Pack of 100pcs ESD-protection zipbag, outside: 223x274mm, inside: 203x254mm, thickness 80µm +/-10µm, Static Shielding <20nJ

Pulling protection and transport protection for connectors and fibers of prefabricated cables of FICONET.

Blanking plug to cover unused adaptor holes in patchpanels, black

cable gland M16 with locknut, colour: grey

crimp splice protector in blister pack for protection against mechanical stress and moisture

to polish ferrule end faces

Cable ties, width: 2,5 mm, length: 100 mm, 100 pcs. per pack

Full Breakout Kit for upto 12 fibers incl. 12m simplex cores orange, outer diameter 2,7 mm

Dust caps for ferrules or adaptors

splice tray Basic incl. 2 splice holders for crimp splice protectors (max. 24 splices)

to polish ferrule end faces

Laser safety glasses 815-3000/10600nm, temple glasses (also suitable for glasses wearers as a spectacle)

labeling system that provides uniform and clear labeling of rack spaces and 19'' patch panels

Cable ties, width: 2,5 mm, length: 100 mm, 100 pcs. per pack, black

two part heat curing epoxy

• cure temperature: at 80° C for ca. 30 min

Pulling protection and transport protection for connectors and fibers of prefabricated cables of FICONET.

Blanking plug to cover unused adaptor holes in patchpanels, black

Prelube 5000™ Microcable Blowing Lubricant for Blowing Fiber Optic Microcables

crimp splice protector in blister pack for protection against mechanical stress and moisture

cable gland M16 with locknut, colour: black

splice tray Basic incl. 2 splice holders for heatshrink splice protectors (max. 12 splices)

Polywater® FST™ Foam Duct Sealant Kit - a Foam Duct Sealing System for 2-inch/50-mm or Larger Conduits

Polywater® FST™ Mini Foam Duct Sealant (Single Kit) - a Foam Duct Sealing System for conduit sizes 3/4'' up to 1.5''

Prelube 2000™ Cable Blowing Lubricant for Blowing Conventional Fiber Optic Cable, 0,95 Liter

• cure temperature: at 25° C: 24h, at 80° C: 20 min

Cable ties, width: 3,6 mm, length: 150 mm, 100 pcs. per pack

crimp splice protector in blister pack for protection against mechanical stress and moisture

Blanking plug to cover unused adaptor holes in patchpanels, black

cable gland M20 with locknut, colour: grey

Fiber Safe Safety Glasses

• for safe fiber guidance in splice boxes
• easy to open and close

Cover for splice tray Basic (plastic)

Prelube 5000™ Microcable Blowing Lubricant for Blowing Fiber Optic Microcables, content: 16-fl oz (480ml)

Polywater® Applicator Gun for FST, UPR & SDP Sealants, e.g. X-PW-FST-250KI1

Polywater® Applicator Tool  for BT, EPCT & SDP Sealants

Prelube 2000™ Cable Blowing Lubricant for Blowing Conventional Fiber Optic Cable, 3,8 Liter

splice tray for up to 2 splice holder (max. 24 splices)

consisting of: Anaerobic adhesive 10ml + activator/primer 30ml, 1x syringe and 1x needle

• Curing time: within a few seconds (no oven)
• Fertility: ca.250-300 connectors

Fiber-Safe Fiber Trash Can

The cable markers are suitable for afterwards mounting on cables, for diameter 2,0 - 2,8 mm

Cable ties, width: 3,6 mm, length: 150 mm, 100 pcs. per pack, black

cable gland M20 with locknut, colour: black

to cover unused adaptor holes in patchpanels

Prelube 2000™ Cable Blowing Lubricant for Blowing Conventional Fiber Optic Cable, 18,9 Liter

Fiber Scraps Disposal Can for safe disposal of cleaved fiber ends

cable gland M25 with locknut, colour: grey

for marking fibers, colors: red, green, blue, yellow, white, gray, brown, purple, turquoise, black, orange, pink (each 200 pieces)

Cable ties, width: 3,6 mm, length: 200 mm, 100 pcs. per pack

Heat shrink splice protector, clear, length: 40 mm

FIONEX®-Bond anaerobic epoxy (10 ml)

Cover for Splice tray (plastic) usable with splice tray part-no. X-SPKAS

cable gland M25 with locknut, colour: black